(4) Resistance measurement
● Insert the BLACK lead to the (-)terminal and the
RED one to another.
● Set the function switch to "Ω / / " range
and make sure there is no power in the circuit
being Measured.
● Connect the test leads to the object under test
and read the display directly.
(5) Continuity test
● Insert the BLACK lead to the (-)terminal and the
RED one to another.
● Set the function switch to "Ω / / " range and
press the "SELECT" button, until the " "
symbol appears.
● Connect the test leads to the object under test.
● The buzzer will work when the resistance is less
than 25Ω.
(6) Diode test
● Turn the function switch to "Ω / / " setting
and press the "SELECT" button twice, until the
" " symbol appears.
● Connect the 2940 CL red and black test lead,
red test lead should connect Diode (+Anode)
black test lead should connect Diode (-Cathode).
The display will show the reading.
- 9 -
