Hoyt 2660CL, Инструкция по эксплуатации

Страница: 11 / 16

( 8 ) RANGE Button
Press the RANGE button to selects the manual range
mode .and turns off the AUTO annunciator and turns on
the MANUAL annunciator. In manual range mode,
each time press RANGE button (less than one second),
the range increments and a new value is displayed.
To exit the manual range mode and return to auto mode,
press the RANGE button (more than one second).
( 9 ) Hold Button
Press the HOLD button (HOLD annunciator turns
on) makes the meter stop updating the display.
This mode can nested in most of the special
modes. Enabling HOLD function in AUTO mode
makes the meter switch to MANUAL mode, but the
full scale range remain the same. HOLD function
can be cancelled by changing the measurement
mode, pressing the RANGE button, or Press the
HOLD button again.
(10) REL Button
The "REL" mode means relative mode. Press the
REL button, the REL annunciator turns on, zero
the display, and store the displayed reading as a
reference value. Press the REL button more than 1
second to exit the REL mode. In the REL mode, the
value shown on the display is always difference
between the stored reference value and the
present reading. If the new reading is the same as
the reference value, the display will be zero. This
function is also made DCA zero adjustment.
- 10 -