Hoymiles MI-300NT Скачать руководство пользователя страница 7

                                                                                     

 

©  2019  Hoymiles  Converter  Technology  Co.,  Ltd.  All  rights  reserved.                                            7   

 

MI-300NT/MI-350NT/MI-400NT 

 

Caution

     

Do not come within 8 inches (20cm) of the microinverter for any length of time 
while it is in operation.     

 

Danger of high voltages   

Danger to life due to high voltage in the microinverter.     

 

Beware of hot surface   

The  inverter  can  become  hot  during  operation.  Avoid  contact  with  metal 
surfaces during operation. 

 

FCC mark   

The inverter complies with the requirements of part 15 of FCC rules. 

 

Read manual first   

Please  read  the  installation  manual  first  before  installation,  operation  and 
maintenance. 

 

2.3 Radio Interference Statement 

 

This microinverter has been tested and found to comply with the limits for part 15 of FCC rules, which 
can provide reasonable protection against harmful energy. However, if not installed according to the 
instructions,  the  microinverter  may  cause  harmful  interference  to  radio  equipment.  There  is  no 
guarantee that the interference will not occur in a particular installation. 

To  confirm  that  the  radio  or  television  reception  is  interfered  by  this  equipment,  you  can  turn  the 
equipment  off  and  on.  If  this  equipment  does  cause  harmful  interference  to  the  radio  or  television 
equipment, please try to correct the interference by one or more of the following measures: 

1) Relocate the receiving antenna. 

2) Increase the separation between the microinverter and the receiving antenna. 

3) Place  the  shield  between  the  microinverter  and  the  receiving  antenna,  such  as  metal  / 
concrete roof. 

4) Contact your dealer or an experienced radio/TV technician for help. 

3. About Product 

3.1 About Single Unit   

“The  world’s  First  Daisy-Chain  Single  Unit  Microinverter”  with  extremely  wide  DC  input  operating 
voltage range (16-60V) and low start-up voltage (22V only). 

Содержание MI-300NT




























Отзывы: