20
(2) Look for the LCD screen display. If the number of Linked microinverters is the same
with the number of total microinverters, it indicates the communication of the DTU and
microinverters is normal.
b.
If the number of Linked microinverters is less than the number of all microinverters,
see “Troubleshooting” on page 23.
7. Wall Mounting(optional)
After the DTU has detected all microinverters of this system, you can mount the DTU on
a wall near this location.
l
Step 1. Mount the DTU in a cool and dry location and avoid heat-generating devices
(oven, warmer).
l
Step 2. Use two drywall screws or wall anchors to affix the DTU to the wall mounted
at the dimensions about 100mm. The maximum screw head diameter is 0.35”, a #8
screw is recommended.
l
Step 3. Slide the DTU onto the mounting screws, aligning the DTU screw holes with
the screws installed in step 2.
0.16Kw 0.07kWh
ALL:05 LINK:05
