1206-ch
-2-
Printed in Canada
HMI
HOYME MANUFACTURING INC. PH. 1-800-661-7382
www.hoyme.com
10
. Turn temperature control to call for heat.
Damper will open and the appliance will operate
normally.
Note: Where a low limit may allow operation of
the burner or fuel valve when thermostat is not
calling for heat, damper shall be used only in
conjunction with Adaptor as shown.
Additional wire shall be of the same size as
originally used when completing electric circuits.
SCHEMATIC WIRING DIAGRAM FOR
COMBUSTION AIR / FLUE CONTROL DAMPER
INTERLOCKED TO LINE VOLTAGE
SAFETY CONTROL CIRCUIT USING ADAPTOR ADP-1102-10A
Note: This marking is also on label to be affixed adjacent to appliance wiring diagram.