Exclusive to Howdens Joinery.co
Page _ 11
User manual LAM2400 LAM2402
Decorative
Chimney
Fitting
•
Connect the extractor to the electricity supply (see electrical connections page). We recommend an
isolation switch that is accessible after installation.
•
The outlet reducer ‘8’ maybe required depending on your ducting kit.
•
Fit the Appropriate ducting kit if venting externally.
•
Rest the chimney sections on the main extractor body and extend the upper section to the ceiling
•
Use the extended chimney to mark-up the position of the upper fixing bracket ‘5’
•
Remove the chimney section, drill and fix the upper fixing bracket ‘5’ into position.
•
Resit the chimney sections on to the extractor body and secure to the upper wall bracket using the
screws ‘4’ provided.
•
Finally re-fit the grease filters
DO NOT: Operate the extractor without the grease filters in position.
3.
2.
1.
5.
**
**
4.
150mm.
(**)
Please use rawl plugs and
screws appropriate to the type of
wall (not supplied)
200mm
3.
2.
1.
7.
4.
5.
700 mm Minimum distance to worktop
750 mm Recommended distance to worktop
p
