Howdens LAM2202, Руководство по установке пользователя

Страница: 15 / 20

Exclusive to Howdens Joinery.co Page _ 15
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause Solutions
Lamp fails to operate? • A replacement lamp is probably
necessary, but check that
the lamp is correctly into
its holder.
(Remember that the lamp is not
covered by the guarantee.)
Disconnect the mains electricity supply before
adjusting or replacing the lamp.
The extractor lamp may become hot; therefore
ensure the bulb has cooled before
replacing.
• Power is cut. Check if there is power. Check the fuses in the
fuse box. If necessary, replace or reset the fuses.
Motor is on but fan
does not seem to be as
• Clogged can reduce the
product’s Check the
grease and charcoal (if
also ensure any venting is
not obstructed?
Clean the grease with warm water and mild
detergent, and/or replace any charcoal
The extractor works
normaly but smells
linger?
• Clogged can reduce the
product’s and may
cause unwanted smells.
Clean the grease with warm water and mild
detergent, and/or replace any charcoal
Product does not
operate?
• The mains fuse maybe defective
or has tripped
Check fuses in the fuse box. If necessary, replace
or reset them.
• Product is not connected
properly.
Check all power connections.
If you cannot eliminate the problem after following the instructions in this section, consult your
depot or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.
Troubleshooting
User manual LAM220 2