Howard REVSCAN FLASH Скачать руководство пользователя страница 7

Страница: 7 / 8

FOR SUPPORT CALL: (888) 323 - 3151

CONNECT YOUR UNIT TO ETHERNET

For instructions including pictures, refer to your RevScan manual.

1. Remove the top back panel.

2. Connect the Ethernet cord to the PC. You may have to unplug a USB for better access to the Ethernet port.

a. Reconnect any USB ports you may have unplugged.

3. Remove the bottom back panel to feed the Ethernet cord down and through where the power cord exits

the unit.

ADJUST THE VOLUME

1. Follow the instructions above to exit the 22MILES software.

2. Press the speaker button in the Windows taskbar.

3. Drag the slider to adjust the volume.

SHUTDOWN YOUR REVSCAN

It is recommended that you follow these instructions whenever turning off the RevScan unit.

1. Follow the instructions above to exit the 22MILES software.

2. Press the Windows Start button.

3. Press the Power button and select “Shutdown”.

4. To power the unit on, simply reconnect the power.

Содержание REVSCAN FLASH

Страница 1: ...FOR SUPPORT CALL 888 323 3151 1 HOWARD REVSCAN FLASH QUICK START MANUAL ...

Страница 2: ...GUIDE TABLE OF CONTENTS Pallet Dismounting 3 4 First Time Setup 5 Tips for Successful Scanning 5 Quick How To s 6 Exit 22MILES Software 6 Connect Your Unit to Wi Fi 6 Connect Your Unit to Ethernet 7 Adjust the Volume 7 Shutdown Your RevScan 7 ...

Страница 3: ... 323 3151 3 PALLET DISMOUNTING 1 Remove the back panel The image below shows the back of the kiosk with the back panel removed You will need to do the same Remove the 4 screws circled in red below to remove the back panel ...

Страница 4: ...ET DISMOUNTING CONT D 2 Unbolt pallet Now at the bottom of the kiosk you should see 2 4 bolts mounting the kiosk to the wooden pallet The hex bolts require a 9 16 socket to remove the kiosk from the pallet Refer to the below picture to the marked bolts ...