Keep tightly closed when in operation
not exceed the rated operating temperature of the fixture.
Do not install in a hazardous atmosphere, except where the ambient temperature does
Make sure the supply voltage is the same as the rated voltage of the luminaire.
Make sure LEDs and drivers are cool to touch when performing maintenance.
Minimum size 18 AWG or 14 AWG for continuous runs.
Use only UL (or other NTRL) approved wire for input/output connections.
Turn off electrical power before inspection, installation or removal.
in accordance with the NEC (National Electric Code) and all local codes.
This product should be installed, inspected, and maintained by a qualified electrician only,
Installation Guide
Read and follow all safety instructions
WARNING
RISK OF FIRE, EXPLOSION AND ELECTRIC SHOCK
Electrical Requirements
Prepare Electrical Wiring
Grounding Instructions
SAVE THESE INSTRUCTIONS
BEFORE YOU BEGIN
The LED driver must be supplied with the voltage specified on the
product label and connected to an individual, properly grounded branch
circuit protected by a 20 Ampere circuit breaker. Use min. 75°C supply.
The grounding and bonding of the overall system shall be
done in accordance with NEC Article 600 and local codes
LED Lighting Fixture
