Page 3 of 3
STEP 4
PLACE THE TWO ADHESIVE BACKED CABLE TIES ON THE LEG ON THE SAME SIDE OF THE DESK AS
THE LED HAND SET. ONE NEAR THE TOP OF THE LEG AND ONE NEAR THE BOTTOM OF THE LEG AS
SHOWN IN THE DIAGRAM.
PLACE THE POWER CORD IN THE TWO ADHESIVE BACKED CABLE TIES (E) WITH ENOUGH CABLE
ABOVE THE TOP CABLE TIE TO THE ALLOW THE DESK TO EXTEND TO ITS FULL HEIGHT. THE SPRING
WILL PULL THE CABLE UP AND TOWARDS THE CENTER BACK OF THE CASE AS THE DESK IS
LOWERED. WHEN THE CABLE IS LOCATED CORRECTLY TO ALLOW FULL HEIGHT ADJUSTMENT
ATTACH THE SMALL CABLE TIE (F) TO THE WOOD BASE WITH SCREW (G) LOCKING THE CABLE IN
PLACE.
STEP 5
FOLLOW THE INSTRUCTION FROM THE KAIDI LIFT COMPANY TO INITIALIZE AND OPERATE THE KAIDI
LIFT.
G
E
F
