28493 WELLINGTON HALL LIFT DESK WJ
28494 WELLINGTON HALL LIFT DESK WD
A
B
C
FLAT W. M6
20 PCS.
Assembly Instruction
PART INSIDE
1
2
TOP ASSEMBLY (1 Pc)
METAL LEGS (2 Pcs)
HARDWARE LIST
SPRING W. M6
20 PCS.
ALLEN BOLT
M6 X 60 (8 PCS.)
D
ALLEN KEY L4
(FOR ALLEN BOLT)
1 PC.
3
WOOD LEG ASSEMBLY (1 Pc)
H
ALLEN BOLT
M6 X 40 (12 PCS.)
E
F
G
SMALL
CABLE TIE
1 PC.
1
2
"
1 PC.
STEP 1.
LAY THE TOP ASSEMBLY UPSIDE DOWN ON A SOFT CLEAN SURFACE.
REMOVE THE THREE DRAWERS. SEE THE HEKMAN DESK DRAWER REMOVAL AND INSTALLATION
VIDEOS AVAILABLE ON LINE TROUGH THE HEKMAN WEB SITE.
PLACE THE TWO METAL LEGS IN THE BRACKETS ON THE BOTTOM OF THE TOP ASSEMBLY, ALIGN
THE BOLT HOLES AND CONNECT USING FLAT WASHER (D), SPRING WASHER (C), AND ALLEN BOLT
(A) WITH ALLEN KEY (H) PROVIDED.
GET ALL THE BOLTS STARTED BUT DO NOT TIGHTEN THE BOLTS AT THIS TIME.
Page 1 of 3
BACKED
CABLE TIE
2 PCS.
A
C D
H
