Child Lock
Child Lock function is only available by using the control panel.
Activate Child Lock
• When the fireplace is ON, hold the POWER button for 10
seconds to activate the Child Lock function. “E3” will be
displayed to indicate the Child Lock function has been
activated.
Deactivate Child Lock
• To deactivate the Child Lock function, hold the POWER
button for 10 seconds.
Other Features
• Each time the fireplace is plugged in or main power is
interrupted, the fan and heater will turn on for 5 seconds.
• The fireplace has a memory function with last settings for
heating level and flame brightness effect, unless the main
power to the unit has been interrupted.
• The fireplace includes an automatic protection system that
will shut off the fireplace to prevent overheating. If the
fireplace is at risk of overheating, the front panel will display
“E1” and the heater will shut off.
Operating Instructions
Fireplace Instructions
Power Button
• Press the POWER button to turn ON or OFF.
• When the fireplace is ON, the power icon indicator light will
be green.
• When the fireplace is OFF, the power icon indicator light will
be red.
• If heater is working before power OFF the fan will have a 20
second shutoff delay.
Mode Button
Press the MODE button to cycle through the different functions.
Temperature Mode
• Press UP arrow or DOWN arrow to set the heater’s
temperature: 59ºF - 86ºF (15ºC - 30ºC), ON, OF (off).
• Hold the MODE button for 3 seconds to change between ºC
or ºF. This function is only available if using the control panel.
• When the ambient room temperature is higher than the set
temperature, the heater will shut off automatically.
Timer Mode
• Press UP arrow or DOWN arrow to adjust the timer setting to
automatically shut off from 0 hour (OFF) to 9 hours with 0.5
hour intervals. Never leave the fireplace unattended.
Flame Brightness Mode
• Press UP arrow or DOWN arrow to adjust the flame
brightness: F0 (no flame) to F5 (brightest).
Care and Maintenance
CLEANING INFORMATION:
• Make sure the fireplace is off, unplugged, and the heating element is cool whenever you are cleaning the fireplace.
• Clean the outside surfaces using a water-dampened, soft, and clean cloth. DO NOT use brass polish or household cleaners.
• Periodic cleaning/vacuuming of the air intake and exhaust vents is recommended.
• Keep clear of dust and debris that could block airflow.
REPLACING THE REMOTE CONTROL BATTERY:
• The battery should be removed if the product is to be left unused for an extended period of time.
• When the remote control stops operating or its range seems reduced, it is time to repave the battery.
• To replace the battery, insert a new CR2025 lithium battery ensuring the polarities of the battery match the inside of the battery
compartment.
