2
Battery
Housing
Transport
Locking
Pin
Figure 8
Pendulum
Guide
10. Release the Pendulum Guide from the Transport-Locking Pin (Figure 8) by gently pushing it sideways, allowing the Pendulum Guide to hang freely.
11. Install two new “C” size alkaline batteries according to the +/- symbols in the Battery Housing. (Figure 8)
9. Locate the Pendulum Driver and Battery Housing inside the Head Assembly (Figure 7).
Figure 7
Head Assembly
Battery Housing
Pendulum Driver
6. Locate the clock’s quartz movement on the back of the dial.
7. Install one new “AA” size alkaline battery according to the +/- symbols in the battery holder (Figure 6).
8. Set the time by using the Time Setting Knob (Figure 6) to rotate the hands to the correct time.
Time Setting Knob
Figure 6
AA Alkaline Battery
