40E Series - Endless Design
Curved Glass - Bakery Dry
Standard Specifications and Optional Features
OPTIONAL FEATURES
A Division of HMC Enterprises LLC •
2501 Grant Avenue • Philadelphia, PA 19114 USA
(215) 464-6800 • 1-800-344-8222 • Fax (215) 969-4890 • E-Mail: [email protected] • www.howardmccray.com
Foamed in place CFC free foam
Heavy gauge steel super structure
Single duty display
Endless design allows for continuous line up
Drain is included for cleaning
Extra wide double bend curved glass (
enhances
product display)
Grey finish extrusion on doors and door tracks
Designer white exterior front and ends
Stainless steel mirror trim
Stainless steel heavy gauge top– 13-3/4" W
Rear of unit is stainless steel brush finish at top
Bottom rear is designer white aluminum
CONSTRUCTION
FINISHES
INTERIOR
REFRIGERATION
White interior ends
2 rows of glass shelving
White aluminum floor (main deck area)
Epoxy coated main deck shelves
Scale stand
Paper cutter
Stainless steel, laminate, or paint
Mirrored doors
Lights for mezzanine shelf
Drop work shelf
Door locks
Digital thermometer
EXTERIOR
LIGHTING
Double pane rear removable doors
Rear doors use the McGlide door system**
(for
easy access)
Newly designed compression door jamb
Removable front grille allows for cleaning
Removable rear grille for easy servicing
1-1/2" removable end panels
Front bumper 2"- gray
1 Row of T8 lighting at top of unit
**
McGlide door system is built with a extra
tight door jam which helps seal the door tight
when closed and prevents cold air from leaving
the unit saving energy costs.
ELECTRICAL REQUIREMENTS
ELECTRICAL REQUIREMENTS
115V/60Hz/1Ph
Unit must be hard wired
115V-12AMP general purpose receptacle wired
separately
Important Note: All refrigerated cases are
designed to operate in an environment of
75 degrees and 55% relative humidity.
Important Note: Product must be cooled
before being displayed within the case.
