User Manual
4
| HoverTech International
Q
2
RollerManual Rev. G
Cleaning & Maintenance
CLEANING
The Q
2
Roller is a single-patient use device. If the device becomes soiled,
completely wipe it down using a germicidal cleaner (phenolic disinfectant,
quaternary solution or other intermediate level disinfectant according to
facility procedure) to disinfect. For best results, follow the cleaner manufac-
turer’s recommended dwell time and instructions for use. Apply germicidal
cleaner directly into hard-to-reach areas. Let air dry. Do not launder.
INFECTION CONTROL
The Q
2
R Pad is recommended to cover the Q
2
Roller to keep the device from
getting soiled (also available for separate purchase). Other materials, such as
pads or linens, may also be placed on top of the Q
2
Roller to keep it clean.
If the Q
2
Roller is used on an isolation patient, the hospital should employ
the same protocols/procedures it utilizes for the bed mattress and/or for
the linen in that patient room.
AIR SUPPLY CLEANING AND MAINTENANCE
See air supply manual for reference.
NOTE: CHECK YOUR LOCAL/STATE/FEDERAL/INTERNATIONAL GUIDELINES
BEFORE DISPOSAL.
PREVENTIVE MAINTENANCE
Prior to use, a visual inspection should be performed on the Q
2
Roller to
ensure that there is no visible damage that would render the Q
2
Roller
unusable.
The Q
2
Roller should be periodically inspected to ensure the following:
• All inflation valves are self-sealing with no evidence of leakage
• There are no punctures or tears in the Q
2
Roller
If any damage is found that would cause the Q
2
Roller not to function as
intended, the Q
2
Roller should be discarded.
4482 Innovation Way
Allentown, PA 18109
800.471.2776
Fax 610.694.9601
www.HoverMatt.com
Returns and Repairs
All products being returned to HoverTech International (HTI) must have a
Return Goods Authorization (RGA) number issued by the company. Please
call 800-471-2776 and ask for a member of the RGA Team, who will issue
you an RGA number. Any product returned without an RGA number will
cause a delay in the repair time.
Returned products should be sent to:
HoverTech International
4482 Innovation Way
Allentown, PA 18109
Attn: RGA #______________________
Phone: 800-471-2776
Fax: 610-694-9601
For European companies, send returned products to:
Attn: RGA #____________
Kista Science Tower
SE-164 51 Kista, Sweden
www.Etac.com
