Hoveround Teknique HD-6, Руководство пользователя, Страница: 43 / 56

Chapter 9
Disassembling and Reassembling Your Teknique
®
HD6
D82014014B 10/15 Chapter 9 43
Controller Removal/Replacement
Removal
1. Check that vehicle power is OFF.
2. Lift the arm and loosen the sockethead cap screw closest to the
controller. Use the 1/4 inch hex wrench supplied with your chair
(See Figure 9A below).
3. Slide the controller bracket forward until it hits the keyhole.
(See Figure 9B below). Remove bracket from arm and place
on footrest or other safe location. Unlock cable from seat or
frame (if so equipped).
Replacement
1. Loosen forward socket head cap screw.
2. Position keyhole portion of bracket over screw and slide into place.
3. Position controller in a comfortable position and secure screw.
4. Refasten controller cable (if so equipped).
Keyhole Cap Screw
Figure 9A Figure 9B