Hoveround Teknique FWD, Инструкция пользователя и гарантия

Страница: 52 / 68

52 Chapter 11 D82007778Q 09/15
Appendix B: Fault Codes
The microprocessor checks various features within the controller and will
display any fault indication. The controller may prevent the chair from
driving if a critical fault condition exists. Refer to the appropriate fault
code section for the system used on your Teknique.
Controllers with system status indicator
Tekniques ® with this controller system use a flashing “System Status
Indicator” light (located in the key symbol). When flashing, it indicates
a “fault” condition somewhere in the control system (See Figure 11A,
Page 54).
When there is a fault please follow this procedure:
A. Switch off the control system.
B. Make sure that all connectors on the chair and
the control system are connected securely. Make
sure brake release levers are in the drive position.
C. Switch on the control system again and try to drive
the chair. If the fault occurs again, switch off and do
not try to use the wheelchair. Contact Hoveround
®
Support 1-800-96-HOVER (1-800-964-6837)