Hover Scrubber Deluxe, Инструкция по эксплуатации

Страница: 3 / 8

|3
Contact Customer Care 1+ (619) 449-2392
Step 1a: Press in silver alignment button on handle. While button is depressed, slide the
handle into the Aluminum Telescopic Pole. Make sure the depressed alignment button
is lined up with the hole in the Aluminum Telescopic Pole. Slide until the alignment button
snaps into the hole. Do not push past metal button and hole.
Assembly:
Step 2: On the bottom of the
telescopic pole depress the silver
alignment button then place the
Aluminum Telescopic Pole onto the
end of main Body. Align the holes in
the end of the telescopic pole with
the silver alignment button on the
main body. Push in the button and
slide the pole down until the button
locks into the hole on the pole. Do
not push past metal button and hole.
Step 4: (Refer to image above)
Plug in charge cable into the charge port
slot on the Main Body. Charge battery for
3 to 4 hours prior to using. The unit will
not run (power up) While charging.
Step 3: (Refer to arrows in the image
above) Plug the power wedge into the 2
holes in the base of the hover scrubber.
Step 1b: In this step you will be
connecting the power cord. Prior
to connecting the power cord
into the main body extend the
telescopic pole by depressing the
adjustment button and extending
the pole. Once the pole is extend-
ed plug the power cord into the
stem of the main body NOTE: The
power cord should not be visible,
all of the cord will be inside the
telescopic pole.