WARNING
Any Jive that does not work properly can
cause you to lose control and fall. Inspect
the entire device thoroughly before every
ride, and do not ride it until any problems
have been corrected.
CHARGING THE DEVICE
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 1-pin charging cable into the charging
port of the Jive Scooter.
(DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY
CAUSE THE PRONGS TO BEND OR BREAK.)
• The charging indicator light on the charger itself should change to
RED, indicating that your device is now being charged.
• When the RED indicator light on your charger turns to GREEN, then
your device is fully charged.
• After fully charging your Jive Scooter, unplug the charger from
your device and from the power outlet.
Only use the included charging cable and
charger to charge your Hover-1 Jive. Using any
other unauthorized charger may damage
your Hover-1 Jive.
CAUTION
CHARGING YOUR JIVE
17
