PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS AND BELL
1
.
Attached the left handle bar by placing it into appropriate sockets
and twisting it anticlockwise in the correct direction.
2
.
Attached the bell into right handle bar.
3
.
Attached the right handle bar by placing it into appropriate socket
and twisting it anticlockwise in the correct direction.
4
.
Tighten the screw in bell by a wrench.
NOTE: If the handlebars do not attach flush to the frame, you may need
to shift the location of your throttle and brake assembly appropriately.
Tighten or loosen the throttle and brake assembly with the included hex key
and make sure they are NOT touching or blocking your handlebars.
PREPARING YOUR SCOOTER
PINCH POINTS
Some parts of your Hover-1 Eagle can injure you if mishandled.
Moving and folding parts can cut skin. Clamps and pivoting parts
such as brake levers can pinch. When folding and unfolding your
Hover-1 Eagle, Please watch for pinch points where possible injury
may be sustained. Do not leave your hand in these areas during
folding or unfolding.
COUNTER-CLOCKWISE
COUNTER-CLOCKWISE
Left handle bar
Bell
Right handle bar
Wrench
Screw
19
