PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS AND BELL
1
.
Attached the left handle bar by placing it into appropriate sockets
and twisting it anticlockwise in the correct direction.
2
.
Attached the bell into right handle bar.
3
.
Attached the right handle bar by placing it into appropriate socket
and twisting it anticlockwise in the correct direction.
4
.
Tighten the screw in bell by a wrench.
NOTE: If the handlebars do not attach flush to the frame, you may need
to shift the location of your throttle and brake assembly appropriately.
Tighten or loosen the throttle and brake assembly with the included hex key
and make sure they are NOT touching or blocking your handlebars.
PREPARING YOUR SCOOTER
Left handle bar
Bell
Right handle bar
Wrench
Screw
COUNTER-CLOCKWISE
COUNTER-CLOCKWISE
20