Hoval BioLyt 13, Руководство по эксплуатации

Страница: 79 / 88

79 4 214 153 / 00
ALARM MESSAGES
6.3 Burner-related alarm messages
Alarm messages on the burner are indicated by the failure indica-
tion lamp on the control panel lighting up. Heating operation is then
stopped. The alarm message can be acknowledge by pressing the
reset button.
The reset button is allowed to be pressed once at most.
If the failure indication lamp continues to be lit, please
contact Hoval Customer Service.
1. Open the flap (1, Fig. 02) on the right of the control panel.
2. Flap (4.1 page 13) with illuminated failure indication lamp is
visible.
3. Press the reset button (2, Fig. 03) until the failure indication lamp
goes out. The fault is acknowledged and heating operation may
be possible again.
4. Close flap (1, Fig. 02).
1
Fig. 02
2
Fig. 03