Hougen HMD904C, Руководство оператора

Страница: 3 / 15

UNPACKING YOUR NEW MAGNETIC DRILL
1 .
Open shipping carton and remove the literature and
hardware packages.
2. Read and Follow All Instructions before attempting
to operate your new Magnetic Drill.
3.
Complete and mail the Product Registration Card now.
It is important that Hougen Manufacturing, Inc. have a
record of product ownership.
4. Open hardware package and check contents.
10565 1/8” Hex wrench for Gib Adjustment
04558 Feed handles (3)
04532 Feed handle knobs (3)
10506 Set screw for cutter installation (2)
10730 Safety chain
02635 Hex wrench for cutter installation
13013 5/32” Hex wrench
5. Using the handle of Magnetic Drill, lift unit out of the
shipping case.
6. Remove all packing and securing material from the drill
unit.
7. Screw the three Knobs (04532) into the three
Feed Handles (04558) and then screw Handles
into the Hub Assembly (40254). Do not overtighten
or may strip the knobs.
8. Attach the coolant bottle with the hardware provided.
9. Your Magnetic Drill was factory adjusted prior to
shipping. Check to make sure that all gib
adjustment screws, motor mount screws, front
support bracket screws, and magnet mounting
screws are snug and have not vibrated loose in
transit.
10. Your new Magnetic Drill comes complete with
arbor mounted. The 3/4” diameter arbor bore
fi ts all 3/4”-shank “12,000-Series” Hougen
Cutters.
Reread Safety Warnings listed in the Operator’s Manual
and on the drill unit to avoid injury. Follow operating
procedures.
3
Always wear eye protection while
using cutting tools, or in the vicin-
ity of cutting.
CAUTION! The slug is ejected
at the end of the cut. Do not aim
cutter or arbor so that ejected
slug may hit someone around, or
below you.
CAUTION! Cutters are sharp.
Wear gloves when installing or
removing cutter from arbor. Do
not grab a rotating cutter.
CAUTION! To prevent electric
shock, do not use power tools
near wet areas, or where power
tool may become wet.
MOTOR PARTS 9
WIRING DIAGRAM 10
ELECTRICAL PANEL PARTS 11
EXPLODED VIEW 12
PARTS LISTING 13
DRILL MAINTENANCE & OPERATION HINTS 14
COMMERCIAL WARRANTY
15
WARRANTY SERVICE CENTERS 16
SAFETY FIRST
WELCOME TO HOUGEN 2
UNPACKING YOUR DRILL 3
SAFETY INSTRUCTIONS 4 - 5
SAFETY SWITCH INDICATOR LIGHT 5
OPERATING INSTRUCTIONS 6
INSTALLING HOUGEN CUTTERS 7
ARBOR & GIBS ADJUSTMENT 7
MOTOR EXPLODED VIEW 8
INDEX