Hougen 10937 Скачать руководство пользователя страница 3

1. Produce the Correct size hole for the Tap you are 

using.

2. Install the Tap-Matic unit using the instructions 

above.

3. Position the machine so the Tap is centered and 

just above the hole.

4. Applied Slick-Stik Lube or a alternative oil appro-

priate for tapping.

4. Lock the magnet in position and verify the Tap is 

still centered over the hole.

5. Start the Motor using the Operating Instruction in 

the Operators Manual.

10

10-32 X 1/2”
 Stop Screw

With either system, verify that the 10-32 X 1/2” Stop Screw 

(10648) is in place and tight.

Your 3-Jaw Chuck is now installed. Select the proper twist bit 

for your application and follow Operating Procedures for the 

Hougen Magnet Based Drill you are using.

6. Rotate the Feed Handles down until the Tap pulls 

thru the material. Feed handles are not used to drive 

the Tap down.

7. When the Tap-matic Assembly makes contact with 

the Stop Screw the gears will disengage and the Tap 

will stop turning. 

8. While rotating Feed Handles to bring the Tap-Matic 

UP, the Tap will engage and turn counter-            clock-

wise.

9. Rotate the Feed Handles until the Tap is clear of 

the work piece and push the Motor OFF button.

MOTOR

10937 TAPPING ATTACHMENT KIT

 

      Set-Screw

                 Spindle Adapter
 

Approx. 1.625”

 

3.875” when the Motor is in the UP position

with 4” of stroke down.

Magnet

  

    Tapping Attachment

Included in the Kit

Approx.  6”

OPERATING THE TAPPING ATTACHMENT

Отзывы: