Unpacking Your New Portable Magnetic Drill
1. Open shipping carton and remove the literature and
hardware packages.
2. Read and follow all Instructions before attempting
to operate your new Magnetic Drill.
3. Complete and mail the Product Registration Card
NOW. It is important that Hougen Manufacturing, Inc.
have a record of product ownership.
4. Open hardware package and check contents.
10565 1/8” Allen Wrench for Gib Adjustment
10569 Feed handles (3)
04532 Feed handle knobs (3)
10727 3/16” Allen Wrench for reversing feed handle.
10730 Safety Chain
10779 7/32” Allen Wrench for cutter installation
13013 5/32” Allen Wrench for arbor installation and
microswitch adjustment
5. Using the handle of the Magnetic Drill, lift unit out of
the shipping case.
6. Remove all packing and securing material from the
drill unit.
7. Screw the three Knobs (04532) onto the three feed
handles (10569) and then screw the handles into the
hub. Do not overtighten.
8. Your Magnetic Drill was factory adjusted prior to shipping.
Check to make sure that all gib adjustment screws, motor
mount screws, front support bracket screws, and
magnet mounting screws are snug and have not vibrated
loose in transit.
9. Your New Magnetic Drill comes complete with arbor
mounted. The 3/4” diameter arbor bore fi ts all 3/4” -
shank “12,000-Series” Hougen Cutters.
INDEX
WELCOME TO HOUGEN
2
COMMERCIAL WARRANTY
2
UNPACKING YOUR DRILL
3
SAFETY INSTRUCTIONS
4 - 5
SAFETY SWITCH INDICATOR LIGHT
5
OPERATING INSTRUCTIONS
6
INSTALLING HOUGEN CUTTERS
7
FRONT SUPPORT BRACKET SETUP
8
DRILL MAINTENANCE
8
COOLANT BOTTLE ASSEMBLY
9
ELECTRICAL PANEL LAYOUTS
10
WIRING DIAGRAM
11
MOTOR LAYOUT AND COMPONENTS
12 - 13
EXPLODED VIEW
14
PARTS LISTING
15
WARRANTY SERVICE CENTERS
16
3
Always wear eye protection while
using cutting tools, or in the vicin-
ity of cutting.
CAUTION!
The slug is ejected
at the end of the cut. Do not aim
cutter or arbor so that ejected
slug may hit someone around, or
below you.
CAUTION!
Cutters are sharp.
Wear gloves when installing or
removing cutter from arbor. Do
not grab a rotating cutter.
CAUTION!
To prevent electric
shock, do not use power tools
near wet areas, or where power
tool may become wet.
SAFETY FIRST
