Power Supply:
10%, 50/60Hz
DC 3 V (2 x 1.5 V AAA Alkaline batteries)
Load Capability:
<16 A, 220VAC
Accuracy:
1deg C
Set-point range:
ambient 5~30 deg C
floor 5~40 deg C
Storage:
-20~50 deg C
Floor Sensor
Heating Element
230V AC
Probe N L M
Wiring Diagram & Technical Specifications
This product should be installed by a qualified electrician.
Press and hold to lock the thermostat. A lock icon will display.
Key Lock & Unlock
Press and hold to unlock the thermostat. The unlock icon will display.
* Note no program changes are possible while the unit is locked.
Page 2
Press , starts flashing, press
or to adjust the setpoint among a range of 5~30 deg C. (for floor mode, the
range will be 5~40 deg C).
Press to confirm.
Press and hold to lock the buttons. A lock icon will display.
Vacation mode is used to drop the heating down to a minimum set temperature to ensure room stays damp free.
Press and hold to unlock the buttons. The unlock icon will display.
220Vac 10%, 50/60Hz
DC 3 V (2 x 1.5 V AAA Alkaline batteries)
Accuracy: ±1
Set-point range: ambient 5~30 deg C
floor 5~40 deg C
Storage: -20~50 deg C
Load Capability: <16 A, 220VAC
deg C
Wiring Diagram & Technical Specifications
Additional Functions
+
230V AC
heating element
Floor Sensor
Probe
N L
M
This product should be installed by a qualified electrician.
Press this tab lightly back and simultaneously push the front
panel upward to release it off the back plate. Wire up the
Thermostat as per the wiring diagram below, then place the
back into the flushbox, and tighten it with the screws provided.
To replace the Thermostat, slide the front panel downward
onto the back plate.
Vacation Mode Adjustment
Key Lock & Unlock
Dimensions & Installation
Power Supply:
96
26.7
88.2
60
6
10
22
40
58
119
122.4
113.6
85 10
10
Using a screwdriver press this tab lightly, and simultaneously push the front panel
upwards to release it off the back plate. Wire up the thermostat as per the wiring
diagram below, then place the back plate into the flush box and tighten it with the
screws provided. To replace the thermostat slide the front panel downwards onto
the back plate. Please ensure that the locking mechanism is securely latched to
lock the front panel onto the back plate.
Press , starts flashing, press or to adjust range will be
5~40 deg C). Press
to confirm.
Vacation / Holiday Mode Adjustment
* Note Vacation mode is used to drop the heating down to a minimum, this avoids
problems relating to freezing temperatures in colder climates.
Hotwire
Thermostat
Instructions
Squeeze these two tabs together and pull down gently.
Installing the Batteries
Insert the two AAA batteries provided.
Slide the compartment back into the thermostat.
Page 2
Press , starts flashing, press
or to adjust the setpoint among a range of 5~30 deg C. (for floor mode, the
range will be 5~40 deg C).
Press to confirm.
Press and hold to lock the buttons. A lock icon will display.
Vacation mode is used to drop the heating down to a minimum set temperature to ensure room stays damp free.
Press and hold to unlock the buttons. The unlock icon will display.
220Vac 10%, 50/60Hz
DC 3 V (2 x 1.5 V AAA Alkaline batteries)
Accuracy: ±1
Set-point range: ambient 5~30 deg C
floor 5~40 deg C
Storage: -20~50 deg C
Load Capability: <16 A, 220VAC
deg C
Wiring Diagram & Technical Specifications
Additional Functions
+
230V AC
heating element
Floor Sensor
Probe
N L
M
This product should be installed by a qualified electrician.
Press this tab lightly back and simultaneously push the front
panel upward to release it off the back plate. Wire up the
Thermostat as per the wiring diagram below, then place the
back into the flushbox, and tighten it with the screws provided.
To replace the Thermostat, slide the front panel downward
onto the back plate.
Vacation Mode Adjustment
Key Lock & Unlock
Dimensions & Installation
Power Supply:
96
26.7
88.2
60
6
10
22
40
58
119
122.4
113.6
85 10
10