10
After you have saved a roast using the “STOR” function you can recall that roast and use it again.
WARNING
:
Read and understand this owner’s manual
and
all
the safety precautions
before
following these step-by-step instructions!
WARNING: Never leave the roaster unattended during a roast!
KN-8828B-2K
Roasting with a Stored Profile
1
2
3
4
5
Plug the machine into an appropriate outlet and the “
POWER
” illuminates.
Press the button next to
POWER
to begin.
“AUTO” is the default display. To select a stored profile use the
CHEVRON
ar-
rows...
...and navigate through the choices to select the desired stored Profile. There are
a total of four choices- AUTO, and the three memory areas where the Profiles are
stored. These are named: Ad1, Ad2 & Ad3.
When the stored program you wish to use is displayed, press the
START
button to begin the roasting process.
1
Select an “
Ad
’ area (Ad1, Ad2, or Ad3) using the Up or Down Chevron Arrows
and then press “
Start
” and the roast parameters and changes will be stored. The
Profile is saved in non-volatile memory and will be available to you until you save a
different profile in that memory location.
The remainder of the roasting process is the same as previously described above in the “Auto
Mode” instructions. If the selected Profile is modified during the roast, the new Profile can be
saved in the same or a different “Ad” area when the roast concludes.
Target Temperature, Target Time, Fan Speed, and Heating Element Power
can all be adjusted at any time during the roast. Use the
SELECT
arrow to choose
a parameter, then use the
CHEVRON
arrows to change that parameter.
4
STORING (Saving) A ROAST PROFILE
When the roast has completed and the cooling cycle is done, if you like the way the roast turned out
and wish to repeat this roast at any time in the future, you may save it. The KN-8828B-2K offers three,
non-volatile memory areas in which to store Profiles. Each area holds one Profile which can be easily
recalled for use in the future.
CAUTION
:
When adding time or increasing the roasting
temperature, care must be taken not to burn the beans.
