Hottek HT-958-010, Руководство пользователя

Страница: 10 / 16

ENG
10
How to use
• Make sure that your hair and hands are dry.
• Completely unwind the cord.
• Make sure the appliance is switched off: On/Off switch (2) to the «Off» position.
Plug it into the socket with 220-240 V ~ 50/60 Hz.
• Slide the On/Off switch (2) from «Off» to «On». Select the required temperature
using the switch (6). Led turns (3) lighting always.
• Wait for heating the plates (1) to operating temperature. Upon reaching the
selected temperature mode indicator lights up ready for operation (4).
• Proceed with hair styling.
• After the procedure hair straightening slide the On/Off switch (2) from «On» to
«Off», indicator light (3) will go out.
• After completion of all tasks, turn off the appliance and unplug it, let it cool
down.
Hair styling
• Wash your hair and dry them.
• To keep your hair away from high temperatures, treat them with thermal
protective aid.
• Take a strand of hair and pull it carefully downwards until it is taut. The
remaining hair should be put up or fixed in place. Before the halves are
pressed together for approx. 5 seconds, we recommend that you ensure
that the hair is positioned correctly. Always begin at the base of the hair
and move the device in the direction of the hair tip. In order to produce a
uniform appearance it is important that the next strands fall in one line.
To ensure that the waves are retained for a prolonged period we recom -
mend that you use only a coarse comb or your fingers
• Repeat this procedure if necessary, until the desired result is achieved.
Secure your hair with styling products.
Cleaning and maintenance
• Unplug and cool down the appliance before cleaning.
• Never put hair dryer and cord into water or other liquid Clean the casing
and plates with a soft, damp cloth, without any additional cleaning agents.
• It is forbidden to use abrasive detergents and solvents for appliance
cleaning.