Hott E802S, Руководство пользователя, Страница: 3 / 22

E802S Overview
Multi-function area
MIC
LED Indicator
Micro USB charging interface
The device will power on automatically while taken out from the box.
The device will power off and into charging while putting put back
to the box.
Power On/Off
Phone Pairing Instruction
1.Take the headsets out from the box, headsets turn on and connect each
other automatically with a beep “TWS connected”. Then the right earbud
speaks ”pairing” with green light flashing, headsets get into pairing mode.
E802S
Left & Right Headset Pairing guide:
1.Take the headsets out from charging box, both headsets will power on
automatically with a beep “Power on”.
2.Press the function area 3 seconds for both headsets,the headsets
paired successfully after both headsets reminding “TWS Connected”
3.If not hear the tone “TWS connected”, please repeat Step 1 and Step 2.
4.TWS reconnected:The headsets will be connected automatically with
the tone “TWS connected” while phone turns on after pairing once.
※
If one side no sounds while connecting,put the headsets back to the
charging box and take out again,headsets will connect to the phone
automatically after connecting with each other.
Notice:
Pairing mode will be exited in 3 minutes if not connected
the phone.Put the headsets back to the charging box can re-enter
pairing mode.
2. Turn on the Bluetooth device on your phone, select: E802S, pair and
connect. You can hear the tone “Connected” while connected successful-
ly.
Notice:
Only the right headset will connect with the
phone, the left one will connect with the
right one.