8.913-996.0 • 8.914-452.0 • 9.800-084.0 • 8.919-013.0 • Rev. 06/11
OPERA
T
OR’S MANU
AL
PRESSURE W
ASHER
4
COMPONENT IDENTIFICATION — SINGLE AXLE MODELS
Pump
— Develops high pressure.
Starter
Grip
— Used for starting the engine man u al ly.
Spray Gun
— Controls the application of water and
de ter gent onto cleaning surface with trigger device.
In cludes safe ty latch.
Detergent Injector
— Allows you to siphon and mix
detergents (not shown).
Wand
— Must be connected to the spray gun.
High Pressure Hose
— Connect one end to water
pump dis charge nipple and the other end to spray
gun.
Note
:
If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will dis charge from pump protector onto fl oor.
This sys tem pre vents internal pump dam age.
Spray Gun
Wand
High Pressure
Hose
Water Inlet
High Pressure
Discharge
Nozzle
Starter
Grip
Pump