97-6230 • HOTSY 555SS • Rev. 12/06
OPERA
TOR’S MANU
AL
PRESSURE
W
ASHER
6
3. Assemble pressure hose onto trigger gun/wand
assembly as shown in
figure 2.
4. Make sure that all plumbing connections are tight.
assembly instructions
assembly
unpacking
Unpack carefully. Wear safety glasses or goggles while
unpacking, assembling or operating pressure washer.
If there are missing components or hidden damage
immediately contact distributor or carrier concerning
discrepancies.
1. Cut strapping band from pressure washer and pallet.
2. Remove pressure washer from pallet.
parts included
•
Pressure Washer
•
Pressure Hose
•
Wand Assembly
•
Operating Instructions and Parts Manual
•
Teflon Tape
tools required
•
10" Adjustable Crescent Wrench (2 ea.)
pressure hose
1. When assembling, use teflon tape on all plumbing
connections to prevent leakage.
2. Install high pressure hose on machine as shown in
figure 1.
Figure 2 - Pressure Hose Installation
trigger gun
Wand assembly
pressure hose
Figure 1 - Pressure Hose Installation
rupture
disk
pressure
hose
