5
5.2.2 Rear Panel
Mark
Type
Instructions
IR
Input port
Connect to IR receiving terminal and make it close to the
remote control
VI Parameters
Parameters
Instructions
Supported Protocol
HDMI 1.3; HDCP 1.3
The Max. Supported Resolution Ratio
1920X1080P@60Hz
Frequency Range of IR Remote Control
20~60KHz
Wireless Standards
802.11a/n
The Max. Wireless Transmission Distance
(Barrier-free) 8112W 150m; 8113W 200m
Working Temperature
-5
℃
~ +70
℃
Working Humidity
5% ~ 90%
Wireless Transmission Frequency
5GHz
VII FAQ
Q: Why does the wireless icon on the top-right corner of the RX receiving terminal is gray?
A: 1
）
Check whether the TX (the transmitting terminal) is connected to power well, and whether the
indicator is on;
2
）
Check whether the transmitting distance is beyond the limit, or whether there are too much
barriers such as walls. Try to install in a place without barriers and interference.
Q: Why does IR reverse control fail to work?
A: 1
）
Check whether IR terminals are properly connected, and separately install them according to
2
）
Check whether the IR transmitting end on the transmitting terminal aligns with the receiver
of the signal source, see the diagram;
3
）
Check whether the IR frequency is within the scope of 20KHz~60KHz.
