We would like to extend our thanks to you for purchasing this sensor.
Before install this sensor, please read the following instructions carefully.
User Manual
<Ceiling Internal Mounting Type>
HR85
1. Features
User Manual
<Accessories>
Motion & Presence
Sensor
Mounting Template
Connection Cable
Front Panel
Disregarding this symbol may result in injury or damage to equipment.
Disregarding this symbol may result in serious injury or death.
The detection area is made up of 6 rows, each of which has 12 detection spots. This provides a very dense detection area of 72 detection spots.
Using prisms makes it possible to detect wider area. (Mount less than 2.8m in case of using prisms.)
Doorway detection can be set. Either doorway detecting mode or usual activation mode can be selected by Dip Switch.
Under usual activation mode, detection area depth is enlarged.
Angle activation area is adjustable by Area Adjusting Screw not by the way of click.
The narrow/wide area can be adjusted by Area Mask.
6 frequency setting to avoid cross interference between sensors in close proximity.
The sensor is microprocessor controlled, providing programmable Presence Timer. (2, 10, 60 seconds,
)
If set to
, the period is infinity in case of the Inner 3 Row.
AC/DC 12
24V is applied as Supply voltage.
Body
Ceiling Mounting Plate
Area Adjusting Screw
Screen
Connector
Fixing Screw
Initialization Indicator LED (Red)
Power Indicator LED (Red)
Operation Indicator LED (Red)
Area Mask
Adjusting
Knob
Prism
(2 pieces)
DOOR SIDE
Dip Switch
Manual Seal
Mount the sensor by following information below.
1.
Mount between 2.0
4.0m. Mount less than 2.8m
in case of using Prisms.
2.0
4.0m
<Option>
Active Infrared Reflection
Detection Method
2.0
4.0m
Installation Height
2
3m / 2.5
4m (Dip Switch)
Mounting Height adjustment
Sensitivity adjustment
-1-
-8-
< Disclaimer > The manufacturer cannot be held responsible for below.
1. Misinterpretation of the installation instructions, miss connection, negligence, sensor modification and inappropriate installation.
2. Damage caused by inappropriate transportation.
3. Accidents or damages caused by fire, pollution, abnormal voltage, earthquake, thunderstorm, wind, floods and other acts of providence.
4. Losses of business profits, business interruptions, business information losses and other financial losses caused by using the sensor or malfunction of
the sensor.
5. Amount of compensation beyond selling price in all cases.
2. Description
3. Mounting Precaution
WARNING
CAUTION
CAUTION
2.
Do not leave any objects which may move
in the Detection Area.
3.
Do not mount where rain or snow can fall
directly on unit.
4.
Do not mount in an area where reflection of
sunlight will shine on unit.
5.
Do not mount in humid or steamy
environment.
6.
Use different frequency settings for sensors in
close proximity. (Maximum 6 sensors)
MP-10169-A
'14
12. Technical Specifications
HR85
Model Name
H / M / L / Snow (Dip Switch)
10 (Area Adjusting Screw)
6R / 5R / 4R / 3R / 2R (Dip Switch)
Depth adjustment
Adjustable Angle
Row
Width adjustment
10 (1 Step)
Adjustable Angle
Wide / Narrow (Area Mask)
Adjustable Area 1
Wideness (with Prism)
Adjustable Area 2
Self-Monitoring
ON / OFF (Dip Switch)
1
st
Row Detection
Doorway / Normal (Dip Switch)
Supply Voltage
AC/DC 12
24V
10%
AC12V : 2.3VA Max
AC24V : 2.9VA Max
Power Consumption
Output
Relay Contact 1a DC50V 0.1A Resistance load
Output Holding Time
Approx. 0.5 seconds
2s / 10s / 60s /
(Dip Switch)
(Set to 2s / 10s / 60s : 6 rows set at the same time.)
(Set to
the period is infinity in case of the 1
st
, 2
nd
, 3
rd
Row, 2 seconds in case of the 4
th
, 5
th
, 6
th
Row.)
Presence Timer
6 Frequencies (Dip Switch)
Frequency
Operating Temperature
Weight
Approx. 310 g
-20
+60
Power Indicator LED : <Power-ON> ON / <2nd Row Overlapped & Self-Monitoring> BLINK
Operation Indicator LED : <Detection> ON / <2nd Row Overlapped & Self-Monitoring> BLINK
Initialization Indicator LED : <During Initialization> ON / <Adjustment Mode> BLINK
LED Indicator
Please note that specifications are changed without notice.
13. External Dimensions
(Unit mm)
58.5
16.6
0.1
34
Thickness
150
Y
Dip Switch X
Dip Switch Y
DC12V : 120mA Max
DC24V : 60mA Max
Y
Y
26 Dublin Street (2nd Floor), Carlow, Ireland
URL: http://www.hotron.com
+353-(0)59-9140543
+353-(0)59-9140345
1-11-26 Hyakunin-Cho, Shinjuku-Ku, Tokyo, Japan
URL: http://www.hotron.com
Fax:
Phone:
Manufacturer
HOTRON CO.,LTD.
SALES Europe
Hotron Ireland Ltd.
+81-(0)3-5330-9222
+81-(0)3-5330-9221
Fax:
Phone:
