INSTRUCTIONS
(continued)
How to Use the Bleach Dispenser
●
Use this dispenser with
HIGH WATER LEVEL—1 cup(310 ml) liquid
liquid bleach only.
If you prefer to
LOW WATER LEVEL—2/3 cup (170 ml) liquid
\
use powdered
●
Pour measured amount of liquid bleach directly
bleach, pour it
into bleach dispenser.
into the wash
●
Do not overfill or allow dispenser to overflow.
basket along with
Avoid splashing. Undiluted bleach can cause fabric
your detergent. Do
damage.
not pour powdered bleach
●
Never pour undiluted liquid bleach directly onto
into the bleach dispenser.
clothes or into the wash basket.
●
Measure bleach carefully.
Here are some recommended amounts:
How to Use the Fabric Softener Dispenser
●
Position the Fabric
●
Do not stop the washer during the first spin.
Softener Dispenser
)
&
\
This will cause the dispenser to empty too soon.
on the agitator.
●
Do not use the Fabric Softener Dispenser with the
●
Pour manufacturer’s
Soak Cycle.
recommended amount
—-
of fabric softener into
●
If the dispenser gets clogged, soak it in a solution of
1 cup (240 ml) water and 1 cup (240 ml) alcohol.
a standard measuring cup.
●
Add enough water to fill the cup 1/2 full.
●
Pour the diluted softener into the dispenser.
●
The fabric softener will automatically be dispensed
at the proper time.
How to Use the Soak Cycle
●
SOAK CYCLE temperature
will automatically be cold.
●
For a hot or warm soak,
set the
Temp.
control to HOT/COLD or
WARM/COLD and turn
the Cycle Selector knob
to MEDIUM cycle setting.
●
Start the washer. After washer fills and begins to
.
0
agitate, push in the Cycle Selector knob and turn
to SOAK CYCLE.
out the Cycle Selector knob
to complete the cycle.
●
●
For an extended soak, allow the washer to fill and
agitate for a few minutes to dissolve the soaking
agent. Then push in the Cycle Selector knob to stop
the washer (keep lid closed) and
to soak for as
long as desired. After desired soak period, pull out
the Cycle Selector knob to complete the cycle.
