Hotpoint WW3440S, Инструкция по использованию и уходу

Страница: 19 / 24

PROBLEM
HEAVILY
AREAS
and cuffs
WON’T
19
●
●
POSSIBLE CAUSE
●
Chemicals such hair bleach, dye, permanent wave solutions, battery acids and
bowl cleaners may cause fabric holes. Rinse all other articles that
came in contact with these chemicals before putting them in wash. Do not
contaminate clothing articles with these
●
As permanent press garments age, they may show fraying at collars and cuffs. This
is normal due to weakening of fibers by the permanent press process. It is not caused
by washer, You can slow this process by washing small permanent press loads with
a medium water level. Do not wash
items such as towels with permanent press.
collar stays, when possible.
●
May be caused by use Regular for delicate articles. Use Permanent
Press Refer to garment manufacturer’s care labels.
●
Garments weakened by sun or atmosphere. This is inevitable and is not caused
by washer.
●
Overloading or under loading washer for selected water level. Load only with
of items that will move freely. Select correct level.
Pretreat with liquid detergent. See Other Laundry Products
Make sure cord is plugged into outlet.
●
Make sure both hot and cold are turned on.
●
Make sure controls are and Selector knob is pulled out to position.
●
Make sure lid is closed. Washer will fill but will spin or with open.
●
Check house or circuit breakers. another appliance is sharing electrical
outlet, remove it. Washer have separate outlet.
●
Make sure temperature selector controls correctly set.
●
Make sure hot and cold faucets are turned on and
regulated correctly.
o
●
Make sure hoses are connected to correct faucets...
hot hot, cold to cold.
●
Water valve screens may be stopped up. Remove inlet
hoses from valve. Clean the screens and reinstall hoses.
●
Check house to make sure it is delivering water at
Make sure drain kinked.
Top of drain outlet should be less than ft. above floor.
●
Make sure hose connections are tight
faucets.
●
sure of drain hose is correctly
inserted and secured to facility.
(continued next page)