12 of 31
Service Manual UK
Whirlpool UK Appliances
English
DISMANTLING INSTRUCTIONS & SAFETY NOTES
Safety Notes:
Ensure that the appliance is disconnected from the Electricity Supply before
commencing any work.
Beware of sharp edges on metal or plastic parts - wear safety gloves.
Refer to Safety Notes at the beginning of this publication.
A
Top Cover
1.
Remove the 2 screws securing the top panel.
2.
Slide forward and lift clear.
B
Back Panel
1.
Remove 6 screws securing panel.
2.
Slide down to remove.
C
Control Panel
1.
Remove the top cover (A).
2
Open the dispenser drawer fully. Gently lift slightly and pull to remove the drawer.
Remove the screws securing control panel to dispenser housing.
3.
Release 2 screws, 1 each end on top corner of control panel.
4.
Release 2 clips holding console to cabinet, gently ease control panel upwards to disengage lugs
from the front panel.
5.
Disconnect the wiring and lift clear.
Note:
When refitting, ensure the control panel is screwed and secured into the dispenser body.
This is easier to check with the dispenser drawer removed.
D
Display Card
1.
Remove the top cover (A).
2.
Release the wiring block from the back of the card.
3.
Remove screws fixing the PCB to the control panel.
4.
Whilst holding the card, ease card away from the control panel.
E
Top Concrete Weight
1.
Remove the top cover (A).
2.
Remove the 3 fixing bolts and lift clear.
F
Dispenser/Valve Assembly
1.
Remove the top cover (A).
2.
Remove the drawer.
3.
Remove the screws securing the dispenser to the control panel.
4.
Remove the inlet valve fixing screws to the rear of the cabinet.
5.
Remove the control panel (C).
6.
Unhook the dispenser outlet hose from the dispenser.
7.
Remove the wires, lift clear and remove the dispenser valve assembly.
