Hotpoint WML 560 A, Инструкция по эксплуатации

Страница: 6 / 16

$
GB
Description of the washing machine
and starting a wash cycle
Detergent dispenser drawer: used to dispense
detergents and washing additives ( see “Detergents
and laundry” ).
ON/OFF button: switches the washing machine on
and off.
WASH CYCLE knob: programmes the wash cycles.
During the wash cycle, the knob does not move.
FUNCTION buttons with indicator light: used to
select the available functions. The indicator light
corresponding to the selected function will remain lit.
SPIN SPEED knob: sets the spin speed or exclude
the spin cycle completely ( see “Personalisation” ).
TEMPERATURE knob: sets the temperature or the
cold wash cycle ( see “Personalisation” ).
WASH CYCLE PROGRESS indicator lights: used
to monitor the progress of the wash cycle.
The illuminated indicator light shows which phase is
in progress.
DOOR LOCKED indicator light: indicates whether
the door may be opened or not (see next page) .
START/PAUSE button with indicator light: starts
or temporarily interrupts the wash cycles.
N.B . To pause the wash cycle in progress, press this
button; the corresponding indicator light will flash
orange, while the indicator light for the current
wash cycle phase will remain lit in a fixed manner. If
the DOOR LOCKED indicator light is switched
off, the door may be opened.
To start the wash cycle from the point at which it
was interrupted, press this button again.
Standby mode
This washing machine, in compliance with new
energy saving regulations, is fitted with an
automatic standby system which is enabled after a
few minutes if no activity is detected. Press the
ON-OFF button briefly and wait for the machine to
start up again.
T E M P E R AT U R E
knob
Detergent dispenser drawer
WASH CYCLE PROGRESS
indicator lights
F U N C T I O N
buttons with
indicator lights
ON/OFF
button
SPIN SPEED
knob
D O O R
LOCKED
indicator light
STA RT/ PAU S E
button with
indicator light
Control panel
WASH CYCLE
knob