●
PROBLEM
(continued)
PROBLEM
POSSIBLE CAUSE
WATER LEAKS
●
Make
hose confections are tight at faucets.
* Make
drain hose is correctly inserted in and secured to drain facility.
WASHER IS NOISY
●
Make sure
is level
firm to
floor
rubber foot pads in place and
jam
See your
A sharp,
sound
heard at the end of each spin period as the motor
stops and
spin
inside the transmission “locks in. ” This sound is
●
Heavily unbalanced loads can
the washer to vibrate excessively during
and
it to move from original position, In extreme cases
occurs
when washing a single, heavy item or a
load when
level is
higher than
necessary), the spin basket may strike
outer tub, creating
but harmless noise.
To correct, open
lid and redistribute the load evenly about the wash basket. Close
the lid and restart.
WASHER PAUSES
●
pauses between washing steps... such as between
spin or
IN
between spin and rinse.
need more
toll free: GE Answer Center
@
/ 800.626.2000/ consumer information service
CARE
USER MAINTENANCE INSTRUCTIONS
The Tub.
The porcelain is self-cleaning. Leave lid open after
washing to
allow moisture to evaporate.
Do not use
harsh or gritty cleansers.
The Exterior.
Wipe off any spills of washing compounds. Wipe
or dust with damp cloth. Try not to hit surface with
sharp objects.
The Lint Filter.
Your lint filter is located under the agitator. It is
maintenance-free.
To Store Washer.
Ask service technician to remove water from drain
pump and hoses to prevent freezing.
Do not store the washer where it will be exposed to
the weather.
For Long Vacations.
Be
sure water supply is shut off at faucets and
drain all water from hoses if weather will be
below freezing.
26
