—
WATER WON’T
. Make sure drain hose is not kinked.
DRAIN
. Top of drain outlet should be less than 8 ft. above floor.
WATER LEAKS
●
Make sure hose connections are tight at faucets.
●
Make sure end of drain hose is correctly inserted in and secured to drain facility.
WASHER IS NOISY
●
Make sure washer is level and firm to the floor with rubber foot pads in place and
front jam nuts tight. See your Instigation Instructions.
●
A sharp distinctive sound will be heard at the end of each spin period as the motor
stops and the spin brake inside the transmission
This sound is
. Heavily unbalanced loads can cause the washer to vibrate excessively during spin,
and may cause it to move from its original position. In extreme cases, (usually occurs
when washing a single, heavy item or a small load when water level is set higher than
necessary) the spin basket may strike the outer tub, creating a loud but harmless noise.
To correct, open the lid and redistribute the load evenly about the wash basket. Close
the lid and restart.
WASHER PAUSES
. Washer normally pauses between washing steps. . . such as between wash and spin or
IN
between spin and rinse.
If you need more help.. call,
free:
GE Answer Center”
– 800.626.2000
consumer information service
25
