.
laundry process can reduce
wash and spin action and prevent
new speed and
out Cycle
the flame
of fabrics. To
completion of the cycle.
Selector Knob to restart.
avoid such a result, the garment
. Do not change SPEED
manufacturer’s care
while washer is
should be followed very carefully.
operating. If a change in speed is
desired, push in Cycle Selector
For
Knob to
position and wait
●
Do not leave washer lid up
for washer to stop. Then select the
during
This
stop the
How to operate your clothes washer
reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY
before operating this appliance.
Sorting and
Setting the controls.
Select Wash/Spin Speed.
●
Sort clothes carefully by fabric
See the Controls Setting Guide on
Push Cycle Selector Knob in
type, weight, color and amount of
pages 6 and 7.
and turn clockwise to your selected
soil. See instructions on page 11.
Select Wash/Rinse
wash setting.
. Load clothes into the wash basket
being careful not to overload.
●
Add measured detergent to wash
load.
See page 8 for Bleach Dispenser
and Fabric Softener Dispenser
instructions.
Refer to pages 11 to 17 for more
information on loading clothes,
detergents, and other laundry
products.
●
Close lid. Washer will fill but not
agitate or spin with lid open.
Select Water Level.
-
LOW: Washer is less than 1/3 full
of clothes.
Any level of fill
between Low and Full.
FULL: Washer is more than 2/3
full of clothes.
RESET: To increase level, turn
knob to “RESET” and then to
new level.
HANDWASH: See page 9.
1
Pull Cycle Selector Knob
out
to start the washer. If you wish to
change setting after washer has
started, push Cycle Selector Knob
into stop the washer and reset to
the new position. Setting can be
changed at any time.
4
