Hotpoint TS13, Руководство пользователя

Страница: 13 / 20

Timer Control – Model TS13
To operate the dryer, close the door
and turn the timer control from the
zero position in a clockwise
direction slightly past the required
drying time, then back to set the
exact time.
The timer can be set to any time up to
120 minutes and can be reset at any
time as required to increase or
reduce the time to dry. The timer is
electrically driven and will therefore
only advance when there is power
supplied to the dryer and the dryer
door is closed. The time indicated on
the timer includes approximately 10
minutes of tumble with the heat off.
Note that the dryer must never be
turned off leaving the clothes in the
drum without first completing the
heat off cool-down period.
Timer Control – Model TS14
To operate the dryer, close the door
and turn the timer control clockwise
from 120 to the required drying time.
The timer can be set to any time up to
120 minutes and can be reset at any
time as required to increase or
reduce the time to dry, but in doing
so the timer knob must only be
turned clockwise. Turning the timer
backwards will cause damage and it
must therefore be turned forwards
even to reach ‘Off’ position. The
timer is electrically driven and will
therefore only advance when there is
power supplied to the dryer and the
dryer door is closed. The time
indicated on the timer includes
approximately 10 minutes of tumble
with the heat off. Note that the dryer
should never be turned off leaving
the clothes in the drum without first
completing the heat off cool-down
period.
Heat Control Switch
Low heat is obtained with the switch
OUT and should be used to dry
acrylics and acrylic mixtures
(excluding wool mixtures). Full heat
is obtained by pressing the switch IN,
and should be used to dry other
materials (excluding wool and wool
mixtures). For instructions
concerning wool see page 11.
Automatic Door Switch
The dryer will stop when the door is
opened and will restart when the
door is closed, allowing items to be
added to or taken from the machine
without the need to reset the
controls.
Mains Light
This light indicates that there is
power being supplied to the dryer
when the wall socket is switched on.
The Controls
13