10
GB
n°
Programme
Description of program
Cycle
duration*
Max. load
Notes/ Options available
11
12
Short 30’
Long 60’
These programmes can be used in order to set the drying time.
-
13
Cuddly Toy
2.5 kg
The cycle preserves the original appearance and brilliance of the cuddly toys at best. Remove all accessories
before proceeding with drying. Every single piece must not exceed 600 gr.
200’
14
Heat & Enjoy
This programme helps to heat towels & bathrobes for a warm sensation after a bath or shower. It is also useful for
warming clothes before dressing during winter. The cycle heats clothes to 37°C (Body Temperature) and runs at
thistemperature for a maximum of 4 hours or until you stop the cycle by opening the door.
-
15
Easy Iron
This cycle allows to extend the fibres of garments thus making ironing and folding easier. Do not use in case
of garments that are still wet. Suitable for small loads of cotton textiles or cotton blends. The cycle duration is
about 15 minutes.
-
16
Refresh
A short programme suitable for refreshing fibres and garments by means of fresh air. Do not use with garments
that are still wet. It can be used on with any load size but is more effective with small loads. The cycle duration is
about 20 minutes.
-
*Note:
The duration of the program will depend on the size of the load, types of textiles, the spin speed used in your washer and any extra options selected.
Options
The options allow for customising the selected programme
according to one’s own needs.
These buttons serves to personalise the selected programme
according to personal requirements.
Not all options are available for all programmes. Some options
are incompatible with the ones previously set. The buzzer and/
or blinking indicators will signal the incompatibiliy. If the option
is available, the option indicator will stay on. Some options
may be kept in the memory of the programme if selected in the
previous drying.
High Heat
It improves the drying capacity. Option suitable for drying tou-
gh garments, it is used with timed cycles.
Quick Dry
Enables quicker drying.
Crease Care
The pre-care option is only available if a delayed start has been
selected. It tumbles the clothes occasionally during the dela-
yed period to help prevent creases developing. The post-care
option occasionally tumbles the clothes after the end of the
drying and cool tumble cycles to prevent creases developing,
should you not be available to remove the load immediately the
programme is complete.The End light is on during this phase.
Note:
The Start/Pause light flashes during this phase. Selec-
ting this option enables both the pre and post care functions if
appropriate.
Delay timer
This option allows you to set the delay of the cycle start. Press
the corresponding button several times to obtain the required
delay. After having reached the max. settable time, the option
is reset by pressing the button again. An indicator on the control
panel signals the time being selected. After having pressed the
button Start/Pause, the machine signals the remaining time for
the cycle start. In case of door opening, after closing, it is neces-
sary to press the button Start/Pause.
Opening the door
If the door is opened (or the START/PAUSE button is pressed)
while a programme is running, the dryer stops and the following
may occur:
• The START/PAUSE button flashes orange.
• When a delayed start is running, the delay countdown con-
tinues. It is necessary to press the START/PAUSE button to
resume the “Delay timer” programme. One of the “Delay timer”
indicator light flashes to signal the delay time entered.
• It is necessary to press the START/PAUSE button to resume
the programme. The progress indicator lights signal the running
phase and the START/PAUSE indicator light stops flashing and
turns green.
• During the post care phase, the programme ends. Pressing the
START/PAUSE button reactivates a new programme from the
beginning.
• By turning the Programme selection knob, a new programme is
selected and the START/PAUSE indicator light flashes green. This
procedure can be used to select the Cool tumble programme to
cool garments if they are judged to be dry enough.
Press the START/PAUSE button to start the new programme.
Note:
If you have a power cut, switch off the power or remove
the plug. When power is restored, plug in the machine, press and
hold the ON/OFF button until the dryer reactivates, then press
Start/Pause button.
