Hotpoint TCF SM 87B, Инструкция пользователя

Страница: 9 / 20

9
GB
Start and Programmes
Choosing a programme
1. Plug the dryer into the electrical socket.
2. Sort your laundry according to fabric type ( see
Laundry ).
3. Open the door and make sure the filter is clean
and in place and the water container is empty and
in place (
see Maintenance ).
4. Load the machine and make sure items are not
in the way of the door seal. Close the door.
5. If none of the lights are on: Press the ON/OFF
button .
6. Choose a programme by checking the Programmes
Guide (
see Programmes ) as well as the indications
for each type of fabric (
see Laundry
).
- Select a programme by rotating the
PROGRAMMES knob.
7. Choose Timed Dry or Dryness Levels option:
- If Timed Dry press and release the Timed Dry
button until the required time is displayed.
or - To change from default dryness setting, press
and release the Sensor Dry button until the
required level is indicated (
see The Display ).
! For full details of selections available for each
programme see the Programme Tables .
Standard Cotton
●
This is a programme for cotton items.
●
The duration of this programme will depend on the size of the load, the dryness setting selected and the spin
speed used in your washer (
see Laundry ).
●
The Standard Cotton programme to EU Regulation 392/2012 is Programme 1 selection with High Heat and
Dryness Level Cupboard Dry.
Note: This tumble dryer, in compliance with new energy saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no activity is detected. Press and hold the ON/OFF button until
the dryer reactivates.
8. Set a delay time and other options if necessary.
9. The START/PAUSE light is flashing green:
- press the START/PAUSE button to begin.
The green light stops flashing.
During the drying programme, you can check on
your laundry and take out items that are dry
while others continue drying. When you close
the door again, press the START/PAUSE button in
order to resume drying.
(
When the door is opened the START/PAUSE light
will flash Amber, after the door is closed and the
START/PAUSE button pressed, the START/PAUSE
light will stop flashing and show green.
)
10. To let you know that your programme is complete
the buzzer will beep 3 times.
Open the door, take the laundry out, clean the filter
and replace it. Empty the water container and
replace it (
see Maintenance ).
11. Unplug the dryer.
Programme Options available
1
Standard Cotton
4
Anti Allergy
6
Quick Dry
5
Synthetics
3
Bed & Bath
ESSENTIAL PROGRAMMES -
Programmes Table
2
Shirts
✗
✗
✗
✗
✓
✓
✓
✓
✗
✗ ✗
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✗
✓
✓
✓
✓
✗
✗
✗
✓
✓
✓
✓
✗ ✗
✓
✗ ✗ ✓
✓
✓
✓
✓
✓
✓
✓
✗
✓ ✓
✓ ✓
✓ ✓
✓
✓
✓
Dryness Levels available
(default highlighted )
Dela
y Timer
Read
y to Ir
on*
Less tangled Heat Le
vel
Timed Dr
y
Sensor Dr
y
●
An Automatic programme
● An Automatic programme
- Medium
- Low
- High
✓
- High
- Medium
- Low
- High
- Medium
- High
- Medium
- Medium
- High
Damp Dr
y
Ir
on Dr
y
Hang
er Dr
y Plus
Hang
er Dr
y
Light Dr
y
Cupboar
d Dr
y
Extra Dr
y
✗
✓
✓
✓ ✓ ✓ ✓ ✗
✓
*Note : This option is not available with Dryness Levels ‘Iron Dry’ and ‘Damp Dry’.