Hotpoint SY23 Скачать руководство пользователя страница 2

DECLARATION OF CE COMPLIANCE

This appliance is in compliance with the following European Directives:

93/68 : General regulations
90/396 : Concerning gas appliances
2006/95/CE : Concerning low tensions
89/336/CEE : Electromagnetic compatibility

CE Regulation n° 1935/2004 :
this appliance is suitable to come in contact with food products.

INSTRUCTIONS FOR THE USER

This manual is an integral part of the appliance.
It is necessary to keep it for the life cycle of the oven and to read it carefully for the
installation, use, maintenance, cleaning and handling of the appliance.
Unplug the appliance before undertaking any sort of intervention on it. 

Attention: earth connection is required by law.

During oven operation, keep children away.
During operation the oven becomes very hot. 
Do not touch heating elements on the inside. 
Do not use steam cleaners to clean the oven. 
Do not use the appliance to heat the room. 

The manufacturer will not be held liable if accident prevention measures are not observed. 
The manufacturer will not be held liable for damage to persons or property due to poor or
lacking maintenance of the appliance.
The manufacturer reserves the right to make any changes to the product which are felt to
be useful or necessary without any advance notice. 

Packaging materials (sheets, polystyrene) may be hazardous to children (danger of
suffocation). Keep packaging materials out of the reach of children.
The appliance is designed for adult users who are familiar with these instructions. 
Children are often not able to recognize the risks involved with the use of the appliance. 
Please supervise properly and do not let children play with the appliance. 
Heat is generated during cooking; the door of the appliance may get very hot, specially if
it is made of glass. There is the risk of burns; do not touch and keep children away. 
The physically impaired must be assisted by capable adults.
Do not carry out any modifications, tampering or repair attempts, especially with tools
such as screwdrivers on the inside or outside of the appliance. 
Repair work, especially on the electrical parts, must be performed only by specialized
personnel.

GB

1

Содержание SY23






















Отзывы: