Hotpoint SMP 85 series, Руководство по эксплуатации

Страница: 3 / 12

3
Description of the appliance
Control panel
1. ON/OFF
The entire product (both the refrigerator and freezer compartments)
may be switched on by pressing this button.
2. REFRIGERATOR and temperature adjustment
Used to modify the temperature setting of the refrigerator; confirmation
corresponding to the selected temperature appears on the display.
3. Refrigerator display
Shows the set temperature for the refrigerator compartment.
4. ALARM
An alarm situation has been detected in the product (see
Troubleshooting section).
5. FREEZER display
Shows the set temperature for the freezer compartment.
6. FREEZER and temperature adjustment
Used to modify the temperature setting of the freezer; confirmation
corresponding to the selected temperature appears on the display.
7. SUPER FREEZE
Thanks to the Super Freeze feature you can freeze food in much
shorter times. In this way the water contained in food transforms into
micro ice crystals. They are so small that they don’t damage the food
tissues. In this way the nutritional values both of fresh and cooked
foods remain unchanged.
At the end of the freezing process the temperature
reverts to the programmed level.
In order to get better results, we recommend that you
enable this feature 1 hour before you start inserting
food inside the freezer compartment.
This feature works for max. 24 hours
8. ECO*
Controls the activation and deactivation of the ECO
function (optimal operating temperature for minimal
energy consumption). Consumption will be optimised
24h after the function was enabled. When this function
is activated, the ECO LED on the keypad lights
up.Press and hold the ECO button for 8 seconds so
that the corresponding LED begins to flash; this will
allow you to set the temperature to in the Refrigerator
compartment and in the Freezer compartment. Two
minutes after the most recent user interaction, the
display enters its energy saving mode.To exit the
energy saving mode, simply press any button or open
the refrigerator door.
8. ACTIVE OXIGEN*
This device releases ozone molecules inside the
refrigerator; ozone is a natural substance which
combats bacteria and microorganisms, reducing
their proliferation while limiting unpleasant odours.
Automatically defines the amount of ozone required
for prolonging the freshness of foodstuffs, eliminating
odours and preventing bacteria build-up.There may
be a slight distinctive odour inside the refrigerator. The
very same smell can sometimes be detected during a
storm, due to the ozone produced as the charge in the
lightning bolts is released; this is completely normal.
The amount produced by the device is very small
and abates quickly as the antibacterial action takes
place.Device is activated pressing the dedicated key
on the display located in front of the fridge door. By
holding the Active Oxygen button for 8 seconds you
can enable the ECO feature.
9. HOLIDAY
Activates or deactivates the HOLIDAY function (the
HOLIDAY LED on the keypad lights up), while the
temperature 12°C and -18°C appear on the
refrigerator and freezer displays respectively. Two
minutes after the most recent user interaction, the
display enters its energy saving mode (see ECO
function).
10. SUPER COOL
You can enable or disable the SUPER COOL feature
(quick cooling of both fresh and just cooked food). On
the keyboard the SUPER COOL LED turns on as well
as on the fridge display.
1
6
7
9
10
8
5
2
3
4
*
Available only on certain models.