Hotpoint SL B16 AA0 UK, Руководство по эксплуатации

Страница: 11 / 16

10
en
hotpoint.
co.uk
13. Wash the Pure Clean Hepa 13 filter under
running water, taking care that the jet of
water is not too strong.
14. Hold it so that the water flows parallel to its
folds.
15. Let it dry at room temperature until all its
parts are thoroughly dry.
Make sure all its parts are thoroughly
dry before replacing them.
16. Fit the pre-filter into the special indentation
of the Pure Clean Hepa 13 filter, locking both
filters in place using the protection grill.
17. Fit the pre-filter, Pure Clean Hepa 13 filter
and protection grille assembly onto the dust
container, paying attention to the positions of
the notches, until it clicks into place.
18. Re-place the dust container into the dust
compartment.
The appliance is equipped with a safety
device that prevents the dust
compartment lid from closing unless the dust
container has been correctly installed. Do not
force the dust bag lid to close it and make sure
all the parts are in the correct position to allow
lid closure.
19. Close the dust compartment lid until it clicks
into place.
ATTACHMENTS
The attachments can either be supplied as
standard features (based on the model) or be
purchased separately from Hotpoint authorised
centres.
Before changing an attachment, during
maintenance, disconnect the plug from
the electrical socket. Do not use aggressive
substances or abrasive materials to clean the
appliance, its internal parts and attachments.
Make sure the appliance is thoroughly dry
before using it again.
Standard/Carpet brush (K)
The standard/carpet brush (1) is suitable for
vacuuming hard and smooth floors as well
as carpets on a daily basis. Use the bristle-
adjustment pedal (2) to clean:
into place.
Cleaning the filters (J)
model without dust bag
This model comprises two Pure Clean Hepa 13
filters. The Pure Clean Hepa 13 filter ensures
maximum protection against allergens and
high air quality, because the air given back by
the appliance is entirely free from dust/powder
residues (filtering power > 99.95 %).
We advise you to clean the filter at least
every 4 months to restore its filtering
power. In any case we recommend replacing the
filter at least every year to ensure maximum
performance.
To clean the Pure Clean Hepa 13 filter (30) in the
back:
1. Disassemble the air grill (31) using the
opening tab.
2. Remove the Pure Clean Hepa 13 filter by
releasing the opening tab.
3. Wash the filter under running water, taking
care that the jet of water is not too strong.
4. Hold it so that the water flows parallel to its
folds.
5. Let it dry at room temperature until all of it’s
parts are thoroughly dry.
6. Re-place the Pure Clean Hepa 13 filter,
paying attention to the positions of the
notches.
7. Fit the air grill into its housing until it clicks
into place.
To clean the dust compartment filters (38):
8. Press the dust-compartment opening button
(13) to open the dust compartment (14).
9. Remove the dust container (39).
10. Release the opening tab and then remove
the Pure Clean Hepa 13 filter, pre-filter (41)
and filter protection grill (40).
11. When cleaning the filter protection grill,
remove any dust/powder residues with a
small brush. If needed, use a damp soft
cloth.
12. Clean the pre-filter by washing it under
running water, taking care that the jet of
water is not too strong. Allow to dry.