Hotpoint SG C10 AA0 UK, Руководство по эксплуатации

Страница: 13 / 18

12
en
the water reservoir.
Scale removal (L)
If your steam generator is not equipped with
the descaling system Calc Proof, clean the
vaporisation chamber to remove any residual
calcareous salts. We recommend cleaning it
every time the descaling button (19) lights up.
Follow the procedure below.
If you wish to clean it after using the
Power Perfection, wait at least 3 hours
until the steam generator has completely
cooled down.
1. Make sure the appliance is disconnected
from the electrical socket.
Clean it near a sink and away from
fabrics so that they don't get stained.
2. Remove the water reservoir (8) and place
the steam generator on a steady flat surface.
3. Turn the steam generator upside down.
Unscrew the protection plastic lid (7) and
the boiler closing cap (7a) using an Allen
spanner.
4. Empty the boiler of any residual water.
5. Fill the boiler with 500 ml of water. Then
close, shake the steam generator and empty
it. Repeat the operation at least twice.
6. Close the boiler, making sure its closing cap
has been fastened all the way. Then re-place
the protection plastic lid.
7. Re-place the boiler in its ordinary usage
position.
8. Connect the appliance to a socket and press
the ON/OFF button (18).
9. Hold down the descaling button for at least
5 seconds or until a buzzer sounds and the
descaling button turns.
When you start the steam generator
again, before using the steam function
on the garments press the steam button for at
least one minute to eject any residues or
particles that could stain the fabrics.
HINTS
If your steam generator is equipped with the
Optimal Soleplate Temperature technology, you
need not adjust the temperature and/or steam.
You can iron all the types of fabrics that can be
ironed in any order.
• Sort the garments out according to the fabric
types. This will reduce the need to adjust
the temperature according to the different
fabrics.
• Start with the garments that require a low
ironing temperature and continue with
the garments requiring higher ironing
temperatures.
• If you are not sure about the composition of
the fabric, try ironing a hidden part such as a
seam, hem or internal section. Start with low
temperature and gradually increase it until
you find the ideal ironing setting.
• When you reduce the steam generator’s
temperature to iron delicate garments, wait
approximately 2 minutes to let the steam
generator reach the new settings.
• Pure wool (100% wool) garments can be
steam-ironed as long as the temperature is
set to wool. We recommend using a cotton
cloth to prevent any shiny marks on the
garment.
• Never iron areas with obvious perspiration
marks because the heat will make the stains
fast and permanent.