background image

9

EN

*

 Only available in selected models.

Half load

If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HALF LOAD
button: the indicator light will illuminate.

Remember to halve the amount of detergent.

It is better to use powder detergent in this case.

This option is incompatible with the following wash

cycle: Fast wash.

Delayed start

It is possible to delay the start time of the wash cycle by
3, 6 or 9 hours.

After selecting the desired wash cycle and any other
options, select Delayed Start by pressing the Delayed Start
button repeatedly; the 

washing (3 hours), drying (6 hours)

and end (9 hours)

 indicator lights will flash in succession.

If the Delayed Start button is pressed again, the option is
deselected.
After the selection process, the countdown will begin if the
Start/Pause button is pressed. The selected delay period
indicator light flashes and the Start/Pause button stops
flashing (fixed light).
When the time has elapsed, the indicator light
corresponding to the selected delay period stops flashing
(fixed light) and the wash cycle begins.

The Delayed Start function cannot be set once the

wash has already started.

Wash options*

The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.

Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not compat-
ible with the selected was cycle 

(see Table of wash cycles),

the corresponding LED flashes rapidly 3 times.

If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompat-
ible option light will flash 3 times and switches off, while
the most recently selected setting remains lit.

To deselect an option which has been set by mistake,
press the corresponding button again.

A

 

B

 

 

Table of 
options

 

Delay 

Start 

Half 

Load 

 

1. Intensive 

 

Yes 

 

Yes 

 

2. Normal

 

 

Yes 

 

Yes 

 

3. Daily A 60’ 

 

Yes 

 

Yes 

 

4. Prewash

 

 

Yes 

 

Yes 

 

5. Eco

 

 

Yes 

 

Yes 

 

6. Fast Wash

 

 

Yes 

 

No 

 

7. Delicate

 

 

Yes 

 

Yes 

Содержание SDAL 1200

















Отзывы: