10
GB
How to run a wash cycle or a
drying cycle
1.
SWITCH THE MACHINE ON.
Press the button;
the START/PAUSE indicator light will flash slowly in a
green colour.
2.
LOAD THE LAUNDRY.
Open the porthole door.
Load the laundry, making sure you do not exceed
the maximum load value indicated in the table of
programmes and wash cycles on the following page.
3.
MEASURE OUT THE DETERGENT.
Pull out the
detergent dispenser drawer and pour the detergent into
the relevant compartments as described in “
Detergents
and laundry
”.
4.
CLOSE THE DOOR.
5.
SELECT THE WASH CYCLE.
Use the WASH CYCLE
SELECTOR knob to select the desired wash cycle. A
temperature and spin speed is set for each wash cycle;
these values may be adjusted. The duration of the cycle
will appear on the display.
6.
CUSTOMISE THE WASH CYCLE.
Use the relevant
buttons:
Modify the temperature and/or spin speed.
The machine automatically displays the maximum
temperature and spin speed values set for the selected
cycle, or the most recently-used settings if they are
compatible with the selected cycle. The temperature
can be decreased by pressing the button, until
the cold wash “OFF” setting is reached. The spin
speed may be progressively reduced by pressing
the
button, until it is completely excluded (the
“OFF” setting). If these buttons are pressed again, the
maximum values are restored.
!
Exception: if the 7 programme is selected, the
temperature can be increased up to a value of 90°C.
!
Exception: if the 9 programme is selected, the
temperature can be increased up to a value of 60°C.
Setting the drying cycle
The first time the button
is pressed, the machine will
automatically select the maximum drying cycle which is
compatible with the selected wash cycle. Subsequent
presses will decrease the drying level and then the drying
time, until the cycle is excluded completely (“OFF”).
Drying may be set as follows
:
A
- Based on the desired laundry dryness level:
Iron “A1”:
suitable for clothes which will need ironing
afterwards. the remaining dampness softens creases,
making them easier to remove.
Hanger “A2”:
ideal for clothes which do not need to be
dried fully.
Cupboard “A3”:
suitable for laundry which can be put
back in a cupboard without being ironed.
B
- Based on a set time period: between
30
and
210
minutes
.
If your laundry load to be washed and dried is much
greater than the maximum stated load, perform the
wash cycle, and when the cycle is complete, divide the
garments into groups and put some of them back in
the drum. At this point, follow the instructions provided
for a “
Dry only
” cycle. Repeat this procedure for the
remainder of the load. A cooling-down period is always
added to the end of each drying cycle.
Dry only
Press button
to perform the drying-only cycle.
After selecting the desired cycle (compatible with the type
of garments), press button
to exclude the washing
phase and start the drying phase at the maximum level
for the selected cycle. The drying level or time may be
set and changed by pressing the drying button
. (Not
compatible with cycles 1-2-3-4 and 14).
Setting a delayed start.
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. To remove the delayed start
setting, press the button until the text “OFF” appears on
the display.
Set the desired wash intensity.
Option
makes it possible to optimise washing
based on the level of soil in the fabrics and on desired
wash cycle intensity. For heavily-soiled garments press
button until the “
Intensive
” level is reached. This
level ensures a high-performance wash due to a larger
quantity of water used in the initial phase of the cycle
and due to increased drum rotation. It is useful when
removing the most stubborn stains.
For lightly-soiled garments or a more delicate treatment
of the fabrics, press
button until the “
Délicate
”
level is reached. The cycle will reduce drum rotation
to ensure washing results that are perfect for delicate
garments.
7.
START THE WASH CYCLE.
Press the START/
PAUSE button. The corresponding indicator light will
turn green, remaining lit in a fixed manner, and the
door will be locked (the DOOR LOCKED
symbol will
be lit). To change a wash cycle while it is in progress,
pause the washer-dryer
using the START/PAUSE
button (the START/PAUSE indicator light will flash
slowly in an amber colour); then select the desired cycle
and press the START/PAUSE button again.
To open the door while a cycle is in progress, press
the START/PAUSE button; if the DOOR LOCKED
symbol is switched off the door may be opened. Press
the START/PAUSE button again to restart the wash
cycle from the point at which it was interrupted.
8.
THE END OF THE WASH CYCLE.
This will be
indicated by the text “
END
” on the display; when the
DOOR LOCKED
symbol switches off the door may
be opened. Open the door, unload the laundry and
switch off the machine.
!
If you wish to cancel a cycle which has already begun,
press and hold the button. The cycle will be stopped
and the machine will switch off.
