background image

GB

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT

.

To receive more comprehensive assistance, register the 

appliance on  

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more 

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

* By selecting the

 

Spin & Drain 

cycle and excluding the spin cycle, the washing machine will 

drain only. 
**  The duration of the wash cycles can be checked on the display

.

***

 

For Prewash press the 

“Temp.”

 button until the symbol 

 lights up (only 90°).

****  After programme end and spinning with maximum selectable spin speed, in default 

programme setting.

4) Eco Cotton - 

Test wash cycles in compliance with regulations 1061/2010. Set 

“Cotton 

” 

 

wash cycle at a temperature of 40°C or 60°C to access this cycles.  

The cycle duration indicated on the display or instruction manual is an estimate based on 

standard conditions. The actual duration may vary in relation to several factors, such as the 

temperature and pressure of the incoming water, ambient temperature, amount of detergent, 

load quantity and type, load balancing and any additional options selected.The values given 

for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 - 

Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient 

programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note: 

spin speed values shown on the display can slightly differs from the values stated in the table.

For all testing institutes:

 

2)  Long cotton cycle: set wash cycle 

Cotton 

 with a temperature of 40°C. 

3)  Long synthetics cycle: set wash cycle 

Synthetics 

 with a temperature of 40°C.

PRODUCT DESCRIPTION

1.

3.

2.

5.

4.

7.

6.

8.

1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)

Maximum load 10 kg

Power input in off  mode 0.5 W / in left-on mode 8 W

Add 

Gar-

ments

(

)

Detergents and 

Additives

Recommended 

detergent

Residual 

dampness % (****)

Ener

gy 

consumption kW

h

Total w

at

er lt

Laundr

temper

atur

e °C

Wash cycle

Temperature

Max. 

spin speed 

(rpm)

Max. 

load 

(kg)

Dura-

tion 

(h : m)

Pre-

wash Wash

Fabric 

softener Pow-

der

Liquid

Setting

Range

1

2

3

Eco 40-60 (1) 

40 °C

 

40°C

1351

10,0

3:59

53 0,88 60

30

1351

5,0

3:00

53 0,63 60

32

1351

2,5

2:35

53 0,38 43

21

Cotton (2) 

40°C

 - 60°C

1400

10,0

3:50

53 1,08 102

45

Synthetics (3) 

40°C

 - 60°C

1200

5,5

2:55

35 0,83 56

43

Mixed 

 

40°C

 - 40°C

1400

10,0

**

Delicates 

 

40°C

 - 40°C

1000

5,5

**

White 

 

40°C

 - 90°C

1400

10,0

2:05

 

(***)

54 0,90 100

42

Anti Stain 40° 

 

40°C

 - 40°C

1000

5,5

**

Rapid 30 min 

30°C

 - 30°C

800

5,5

0:30

71 0,21 50

27

Spin & Drain *

1400

10,0

**

Rinse & Spin 

1400

10,0

**

Steam Refresh

2,0

**

20°C

20 °C

 - 20 °C

1400

10,0

1:50

55 0,20 95

22

Wool 

40°C

 - 40°C

800

2,5

**

Anti Allergy 

60°C

40°C - 

60°C

1400

5,5

**

Bed & Bath 

 

60°C

 - 60°C

1400

10,0

**

 Dosing required   

 Dosing optional

Eco Cotton (4) 

(Cotton 

 )

60 °C

60 °C

1400

10,0

3:25

53 0,97 58

40 °C

40 °C

1400

10,0

3:50

53 1,08 102

DETERGENT DISPENSER DRAWER

compartment 1: Pre-wash detergent 

(powder)

compartment 2: Detergent for the wash 

cycle (powder or liquid)

If liquid detergent is used, it is recommended 

that the removable plastic partition A 

(supplied) be used for proper dosage.

If powder detergent is used, place the partition 

into slot B.

compartment 3: Additives (fabric softeners, 

etc.)

The fabric softener should not overflow the grid.

Use powder detergent for white cotton garments, for pre-washing, and 

for washing at temperatures over 60°C.

Follow the instructions given on the detergent packaging.

1

2

3

A

B

1.

  STEAM HYGIENE / MUTE button

2. 

 FINAL CARE / KEY LOCK button

3.

  ON/OFF button

4.

  ACTIVE CARE button and indicator light

5.

  START/PAUSE button

 

6.

  RAPID / GREEN button

 

7.

  SPIN button

 

8.

  START DELAY button 

9.

  TEMPERATURE button 

10.

  WASH CYCLE SELECTOR KNOB

1 2

4

5

6

7

8

9

3

10

DISPLAY

Отзывы: